home *** CD-ROM | disk | FTP | other *** search
- Path: Austria.EU.net!usenet
- From: hak@vip.at (Herbert Klackl)
- Newsgroups: comp.sys.amiga.networking
- Subject: Re: AmiTCP/PPP/Amosaic problem
- Date: 2 Jan 1996 08:38:29 GMT
- Organization: EUnet EDV DienstleistungsgesmbH, Wien
- Message-ID: <1139.6575T573T2889@vip.at>
- References: <4c7kh8$3rr@parsifal.nando.net>
- NNTP-Posting-Host: 193.83.128.197
- X-Newsreader: THOR 2.21 (Amiga;TCP/IP) *UNREGISTERED*
-
- In a message from 31-Dec-95 22:30:48, grrc wrote:
-
- >Well, I managed to track down all the pieces (PPP,AmiTCP,Amosaic) and
- >most of the installations done but I am still running into a couple of
- >problems getting Webbed:
- >1) When I use the s:dialscript option it fails with a timeout -
- > the script gets to AT&d0####### echos it and the next line but I
- > hear it dial and it finally times out.
-
-
- Well, I only can think of one of the following possibilities that might lead
- to that error:
-
- TIMOUT entry in "s:dialscript" to short
- Wrong unit number in "ENV:Sana2/ppp0.config"
- Modem is switched off
- No connection Computer - Modem
- Cable Computer - Modem broken
- Baud rate in "ENV:Sana2/ppp0.config" to high
-
-
- >2) I remove the dialscript option, re-boot, and login with NCOMM (after
- > setting AT&d0), I quit from ncomm and execute startnet and it hangs out
- > for a while then fails with S2_ONLINE: Device driver is off-line
- > (unit is currently off-line) online failed returncode 10.
-
- Sorry, can't help you at this one, since my dialscript works and I don't know
- NCOMM.
-
-
-
- Bye Herby
-
-